As a reminder, a full charge deserve to take as much as 2 hours and also the charge case LED will avoid flashing and display together a heavy white LED when completely charged. 

 

If girlfriend have evidenced your Jaybird Vista are totally charged, please try the following.

You are watching: Jaybird freedom not charging

 

After opened the charge case lid, wait for a pair of seconds prior to removing your earbuds native the instance or putting them into pairing mode.

 

If the does no help, visible or non-visible dust or dust might cause your Jaybird Vista earbuds to not charge, rotate on, or the charge case LEDs not working as described. 

 

To clean her Jaybird Vista fee contacts, follow these steps:

 

Step 1

Check that the earbuds room being inserted correctly in the charge case

Eargels need to be set up correctly

The charging situation lid need to close properly

Check the correct charge cable is being used

Use the Jaybird Vista fee cable 

Alternatively, use a standard USB-C cable

 

Step 2

Blow top top the charge contact points in bespeak to remove any loose debris ~ above the earbuds and charge pins in the charge case

 

Step 3

If the issue persists below are some alternatives to clean the charge call points on the earbuds and charge pins in the charge situation using typical household items. 

 

Things to be mindful of once cleaning:

Never usage sharp or abrasive objects to clean the charge contact points ~ above the buds or in the charge case.

Only use little amounts of any cleaning liquid.

Never disclose earbuds or charge case to any fluid directly. Ar the liquid on a towel or swab and then clean.

Make sure earbuds and also charge case are fully dry before attempting come charge.

Cotton swab

Use a warm, damp noodle swab (used because that cleaning ears) to tenderness wipe the charge call points ~ above the earbud and also the fee pins in the charge case. 

If needed, add a small amount of dish soap, to cut through any kind of wax or grease.

Make certain earbuds and also charge case are fully dry before attempting to charge.

Thin clean cloth (e.g. Glasses cleaning cloth)

Lay a thin, soft, and clean towel over the charge call points and also then usage a document clip (or similar) to push the fabric into the charge call points top top the earbuds and also clean them. Do sure any cloth is clean the dust and also dirt.

Use a similar method for the fee pins on the case yet be careful and don’t use pressure to stop bending them.

Isopropyl alcohol

Use an alcohol swab or use a tiny amount of isopropil alcohol to a cloth or cotton ball. 

Gently wipe the charge call points top top the earbud and the fee pins in the charge case.

See more: Elite Dangerous Pulse Vs Burst Laser Vs Pulsed Laser S Vs Burst Lasers

Air duster - high pressure air in a can with a tube

Apply a couple quick blasts of air come the charge call points top top the earbud and also the charge pins in the charge case. The air will certainly get colder over time with a much longer blast therefore a couple quick blasts room recommended.