A client asked me, a few days ago, to update the currently 32GB SSD in she relatively brand-new laptop come a SAMSUNG 256GB SSD. My an initial thoughts to be “easy; take turn off a few screws, install brand-new SSD; clone old SSD come new; ready”.

You are watching: Hp 14-an013nr hard drive upgrade

This laptop is quite easy to disassemble.

Lay the laptop top top a level surface upside under (with the lid ~ above the bottom)Unscrew every screws girlfriend see. There space 8 screws visibleTake out the battery to expose 2 an ext screwsRemove the 2 rubber feet on every side the the battery, to expose 4 much more screws (2 under every foot)Turn the laptop appropriate side up and also open the lidInsert a plastic pry tool in between the top and also bottom parts of the case. I suggest starting on the ideal side (VGA connector top top the left protrudes with the plastic case) and also working your way around the caseLift the top component of the case, with all the electronics and also display, clean of the instance and collection it top top the table
*
Screw locations on the bottom instance (8 visible + 2 under battery +2 under rubber feet)
*
One that the screws under the battery
*
A plastic pry tool inserted between the bottom and top parts of the case. (Chips and scratches preexistent ;) )The VGA connector protruding from the side of the case. Start unclipping the case from the other side and also “slide” it over the connectors
*
The laptop innards. Keyboard, screen and motherboard room all one unit

After acquisition the laptop apart, I found that HP didn’t use a traditional connector because that the built in SSD. Instead of the “normal” SATA connector they offered a flat-flex cable to attach the SSD come the motherboard. A search on the web revealed that there exists an adapter to convert from a conventional SATA connector to the flat-flex connector ~ above the motherboard, but at $60 ns was not prepared to bespeak it.

*
The FFC used to connect the currently SSD to the motherboard
*
The mini-SATA connector for the DVD drive

Looking in ~ the laptop i noticed there was a slimline SATA connector top top the motherboard in ~ what looked prefer a ar for a DVD drive, return this details model didn’t have actually the appropriate cut-out on the case. Therefore I determined to usage a caddy to affix the SSD come the laptop. These caddies are used to replace the DVD in a laptop through a difficult drive and are rather cheap.

See more: Find The Pressure Inside The Submarine Is Maintained At 1.0 Atm

*
The caddy through the new SSD put inside the laptop

After the it to be a simple matter the cloning windows to the new SSD and an altering the boot device. I chose to leaving the initial SSD in location as extra storage, as it would execute no harm and also I didn’t feeling goo leaving an FFC flapping approximately in the breeze.