Removing A No-Screw speak From A wood Box

Usually, speakers with no visible screws have hidden screws beneath their external casing. An additional possibility is the the components are glued together. The is particularly true v speakers that room painted or have actually a glowing surface.

You are watching: How to take apart speakers with no screws

A speaker v a shiny surface ar or painted exterior is typically glued together. You can bet there space screws beneath the rubber feet, but they aren’t easy to see. If girlfriend can’t uncover screws, try lightly tapping the side of the case with a driver handle.

The vibrations may assist the adhesive loose. When you think you have a point out that’s looser than the rest, shot inserting a slim blade come pry it open. Be cautious not to scratch the exterior, though. Girlfriend can additionally use a utility knife or multi-tool v a metal blade to reduced through the glue.

Warning: do not use a screwdriver with a magnetized end; it can wipe away any kind of markings that suggest which way the speaker’s confident and an adverse terminals space wired.

Removing A Speaker without Screws indigenous A Plastic Container

*

Speakers v plastic housings room usually much easier to open than those encased in wood or metal. You have the right to use a screwdriver (again, be cautious not to scrap the speaker’s casing), but you can be much better off using a warmth gun or hairdryer on low heat. The heat will loosen the glue and also you can open the speaker easily. If not, usage a thin blade come cut about the edge.

If the speaker is painted, you have the right to scrape off some repaint to do a cleaner line. Warning: A heat gun or hairdryer will certainly melt plastic or paint.

If friend can’t obtain something open by heater it, an episode the power tools. Usage your drill to carefully bore with the plastic. You’ll have to work slowly and hold the drill straight, or you can damage interior parts. Drill through all the method from one next to the other. Once you have actually a hole, stick the blade of your thin energy knife in and cut follow me the edge.

If there space plastic clips holding the situation together, you deserve to use needle-nose pliers come twist castle off. Be mindful when removing clips that room attached to wires; you might cause the wires come break.

Speakers through No Screws ~ above The external Case

Sometimes, all you view on the outside of a speaker room wires causing jacks or bare wire terminals. You can regularly pry this speakers open up with a thin blade, but there’s another method to take them apart.

Use a screwdriver to ease (but don’t remove) the speaker’s terminals. Then, insert etc picks in between the speaker cone and the magnet. Don’t use file picks; they’ll break. Slide the picks (there need to be at the very least three of them) up and also down to separate the speaker’s components. Warning: execute not usage this method on tweeters; their cones are paper-thin and you could damage them.

A No-Screw Speaker v A Hinged Case

Speakers through hinged situations can be even more difficult to open since there’s a risk of damaging the wires. Because of this, you might want to shot a driver first.

If you have actually a little flathead screwdriver, on slide it into one of the seams and try to open up it in ~ a corner. Be sure you’re just inserting the screwdriver into the seam, not in between the speaker’s components.

You can likewise use your utility knife to cut away in ~ a edge of the speaker. Begin with a small cut, and expand it only as much as you must so friend won’t damage the speaker’s cone or various other components. You can also use a hacksaw (again, paper down the teeth first).

OtterBox Speaker

One the the most challenging types that a speak to open is one OtterBox. These speakers room encased in thick plastic shells that professionals typically don’t try to pry open. If girlfriend can’t obtain in by opening seams, reduced away at the speakers’ edges through a hacksaw or energy knife. As soon as you have an opening, you have the right to use a driver to release the speaker’s components.

See more: How To Fix Nexus 5 Black Screen Problem, Can'T Use Screen During Calls On Nexus 5X

Speakers through No Screws and also A metal Case

Some speakers space encased in aluminum or other metal casings. You deserve to use a hacksaw to reduced through the side, but you should be cautious not come damage any kind of of the speaker’s components. A much better choice is a Dremel tool. It can reduced through metal quickly and cleanly, and also you won’t need to worry about accidentally damaging the speaker. Friend will, however, require a steel cutting blade for a Dremel tool.

If you’re really short on time, you have the right to wrap the speaker in a towel and use your drill to bore into it. This is exceptionally dangerous, however, due to the fact that you can accidentally struggle the cone and damage it