By complying with these steps, you deserve to reprogram your DVR cable box, so as soon as you push a switch on your remote manage it skips forward 30 seconds. The reprogramming actions depend on which model of far you have.

You are watching: Comcast 30 sec skip

*
Older silver- Comcast remotes:

Here are the procedures for the older Comcast remotes make by Motorola.

if doing this, hold the far close come the cable box. Remember, you room actually reprogramming the DVR cable box, not the remote control itself. Pick an unused or unneeded button on the silver- remote to come to be the brand-new 30-second skip command. A great choice is the ‘A / Lock’ button because many users don’t need that function. Push the Cable switch at the height of the far to placed it right into Cable Box control mode. Press and hold the Setup switch until the “Cable” switch blinks twice. Type in the code 994. The “Cable” button will blink twice. Push (do not hold) the Setup button. Kind in the password 00173. Press the A/Lock button.

That"s it! now anytime you push the A/Lock button when city hall a recording, you will certainly skip ahead 30 seconds.

These hacking instructions occupational on the Motorola HD DVR DTC6412 and the Comcast On demand Remote (Comcast URC-106XXXXX silver- Remote).

See more: How To Fix A Rib Out Of Place, How Chiropractic Can Help With A Dislocated Rib

Older dark gray Xfinity remotes:

This is for the darker color remotes that say "Xfinity" top top the bottom. This remote replaced the Comcast one described over and pictured to the right.

if doing this, organize the far close to the cable box. Remember, you space actually reprogramming the DVR cable box, no the remote manage itself. Pick an unused or unneeded button on the remote to end up being the new 30-second skip command. A an excellent choice is the ‘A / Lock’ button because many individuals don’t need that function. Press the AUX switch at the height of the remote. Press and hold the Setup button until the “AUX” switch blinks twice. Kind in the code 01376. The “AUX” switch will blink twice. Push the AUX switch again. Press and hold the Setup switch again until the"AUX" switch again blinks twice. Type in the code 994. The "AUX switch will again blink twice. Press (do no hold) the Setup button. Kind in the code 00173. Press the CABLE button. Push the A/Lock button.

XR2 (and perhaps XR11 and also XR15) remotes used with the Xfinity X1 DVR cable box:

The Xfinity X1 cable box remote regulate XR2 can be programmed, yet it requires fully different steps. These procedures might also work on the XR11 and XR15 remotes also. Carry out these procedures to program a 30-second forward skip into the page UP button:

while doing this, hold the far close come the cable box. Remember, you space actually reprogramming the DVR cable box, not the remote control itself. Revolve off the television. Top top the remote, press the EXIT switch three times in a row. Form in 0030 with the number keys.

Troubleshooting/problem solving:

If you had the 30-second skip programmed yet it stopped working (frequently since of DVR software update on Comcast/Xfinity end), shot doing a 5-minute code complied with by a 30-second code...i.e. Leave EXIT leave 0500 followed by exit EXIT exit 0030. Hold the remote very close to the cable crate while pressing the reprogramming switch steps. The reprogramming actually is reprogramming the DVR cable box, no the remote control itself. Make certain you are pressing each button deliberately. Not too fast, yet not too sluggish either. Make certain the DVR is not recording a program while you carry out these reprogramming steps. Shot turning off the TV itself during this process. Then revolve TV earlier on. Try placing the cable crate in standby setting (hit power button on front of cable box) first. Shot unplugging the power cord native the cable crate for 2 minutes, climate replugging it in (rebooting the box) and waiting a few minutes. Then try the reprogramming procedures again. Shot unpairing and also then repairing the remote. Shot replacing the batteries in the remote before the reprogramming steps. To return the switch to the default 5-minute button, monitor the same steps, however enter 0500 instead (the 4-digit code is the skip time in seconds).

There is a good Wikibooks source for an ext information at: Programming the Motorola DVR far Control.